S460ML

S460NL & S460ML

Unlike any other structural specification under EN10025 S460 material does not have any direct equivalents in ASTM or Shipbuilding (ABS/BV/LR) designations.

S460NL & S460ML is used in a number of offshore and onshore applications e.g. legs supports for a jack up platform offshore and as mooring piles for a LNG onshore terminal.

S460NL
A normalised material with a minimum yield strength of 450 N/mm2 that has been impact tested at -50°C. S460NL is produced under European designation EN10025-3.

S460ML
A thermo-mechanically rolled material with a minimum yield strength of 450 N/mm2 that has been impact tested at -50°C. S460ML is produced under European designation EN10025-4 (TMCP).

are able to supply a wide range of S460 material (in both normalised and TMCP conditions), our material ranges from 6mm to 80mm thick and up to 3 metre’s wide and 12 metre’s in length.

Chemical Composition of S460NL & S460ML

Grade C Si Mn P S N Al Cu Cr Ni Mo Nb V Ti
S460NL 0.20 0.60 1.00/1.70 0.025 0.020 0.025 0.020 0.55 0.30 0.80 0.10 0.050 0.20 0.05
S460ML 0.16 0.60 1.70 0.025 0.025 0.025 0.020 0.55 0.30 0.80 0.20 0.05 0.12 0.05

Main chemical composition in EN 10113-3 S460ML steel is carton max 0.16, silicon max 0.60, manganese max 1.70, phosphorus max 0.025, Sulphur max 0.02, chromium max 0.30. More detailed information about S460ML steel, please refer to the down table:

Grade

C
max

Si
max

Mn
max

P
max

S
max

N
max

AL
max

Nb
max

V
max

Ti
max

Cr
max

Ni
max

Mo
max

Cu
max

CEV
max

S420ML

0.16%

0.60%

1.70%

0.025%

0.02%

0.025%

0.02%

0.05%

0.12%

0.05%

0.30%

0.80%

0.20%

0.55%

0.48%

EN10113-3 S460ML is a technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.S means the structural steel, M means the delivery condition.Capital letter L for the quality with specified minimum values of values of impact energy at temperature not lower than -50 degree.

Temperature

-50

-40

-30

-20

-10

0

20

Notch impact test. Min. absorbed energy

27

31

40

47

51

55

63

 

Nominal thickness(mm)

to 16

16-40

40-63

63-80

80-100

100-120

ReH-Minimun yield strength(Mpa)

460

440

430

410

400

385

 

Nominal thickness(mm)

to 40

40-63

63-80

80-100

100-120

Rm-Tensile strength(Mpa)

540-720

530-710

510-690

500-680

490-660

Nominal thickness(mm)

-

A-Minimum elongation 
Lo=5,65√So(%)

17


Request for Quotation

You can get the price list and a RKHZ STEEL's representative will contact you within one business day.